Fire shutter door instructions and fire code

Instructions for use

1, Fire prevention door can not be used as an ordinary door, rolling shutter door is strictly prohibited at the bottom of the standing. Electrical facilities shall not be removed and switched without authorization, operate automatically under the action of smoke temperature sensing signal, and manual operation is allowed only under the action of signal failure in the fire control room;

2. According to the fire control regulations, Fireproof rolling shutter door, as a special fire fighting facility, shall not be used for other purposes, and no items shall be stacked directly under the rolling shutter;

3, after installation and commissioning, start once a quarter to check electrical and mechanical properties, pay attention to operation safety

Two, Fireproof rolling shutter door fire code

1. The Fire shutter on the channel should be lowered automatically according to the following procedures: (1) After the smoke detector is activated, the shutter should be lowered to 1.8M away from the ground (floor); (2) After the action of the temperature detector, the roller curtain drops to the end;

2. Fire shutter used as Fire prevention separator. After the fire detector is moved, the shutter should be lowered to the end;

3, the surface of the curtain plate, guide rail, lintel, scroll and other parts are not allowed to have cracks, pits and more obvious concave and convex, hammer marks, burrs, holes and other defects, strictly prohibited for other purposes.

4, when the relative moving parts move up and down, roll up and down, it is strictly prohibited to stack items to affect the opening and closing of the rolling shutter door.

5, Fireproof rolling shutter door exposed surface, must pay attention to rust treatment (do not spray randomly), every quarter should check the flexibility of opening and closing.

6, Check all fasteners once a month, must ensure that the fasteners are tight, do not allow loose phenomenon.

7, the upper part of the opening of the shutter door shall not be provided with ventilation pipes, water pipes, etc.;

Instructions for use

1, Fire prevention door can not be used as an ordinary door, rolling shutter door is strictly prohibited at the bottom of the standing. Electrical facilities shall not be removed and switched without authorization, operate automatically under the action of smoke temperature sensing signal, and manual operation is allowed only under the action of signal failure in the fire control room;

2. According to the fire control regulations, Fireproof rolling shutter door, as a special fire fighting facility, shall not be used for other purposes, and no items shall be stacked directly under the rolling shutter;

3, after installation and commissioning, start once a quarter to check electrical and mechanical properties, pay attention to operation safety

Two, Fireproof rolling shutter door fire code

1. The Fire shutter on the channel should be lowered automatically according to the following procedures: (1) After the smoke detector is activated, the shutter should be lowered to 1.8M away from the ground (floor); (2) After the action of the temperature detector, the roller curtain drops to the end;

2. Fire shutter used as Fire prevention separator. After the fire detector is moved, the shutter should be lowered to the end;

3, the surface of the curtain plate, guide rail, lintel, scroll and other parts are not allowed to have cracks, pits and more obvious concave and convex, hammer marks, burrs, holes and other defects, strictly prohibited for other purposes.

4, when the relative moving parts move up and down, roll up and down, it is strictly prohibited to stack items to affect the opening and closing of the rolling shutter door.

5, Fireproof rolling shutter door exposed surface, must pay attention to rust treatment (do not spray randomly), every quarter should check the flexibility of opening and closing.

6, Check all fasteners once a month, must ensure that the fasteners are tight, do not allow loose phenomenon.

7, the upper part of the opening of the shutter door shall not be provided with ventilation pipes, water pipes, etc.;